My cardkey doesn't work...

Solution My Cardkey doesn’t work…

Q: Have you gotten it programmed by the cardkey office?

Solution: Go to room 477 and have the staff program your current card into the system.

Q: Is this a new card?

Solution: Access is granted to the card not to the user. If you have gotten a new card because of a lost or damaged card then you need to have the new card entered into the system by the staff in 477.

Q: Have you damaged your card?

Solution: Cards have a fine layer of wires embedded in them, if you bend, fold, or punch holes in the card it may be damaged and will fail to work on the door readers. Your only option is to have the card replaced by the Cal1 card office and then return to 477 Wurster to have it programmed.

Q: What happens at the door reader when you try user your card?

Solution: A defective card will not cause any change to the door reader, a good card will cause the light to change and the reader to beep. A good card can be programmed, a defective card will need to be replaced by the Cal1 office before it can be programmed.

Was this article helpful? yes / no

Article details

Article ID:	4
Category:	Student Technology Center
Date added:	2010-09-01 08:11:48
Views:	260
Rating (Votes):	(8)

« Go back